Painted walls can accumulate stains, marks, shoe scuffs, and dust that give the surface a dull, dirty appearance. To preserve that freshly painted look, plan to wipe down walls regularly. However, walls with different paint types and finishes require special care when scrubbing.

We will use sponge and cleaning agent to clean wall.

Do not use harsh chemicals or degreasers when cleaning flat painted walls. When washing with a sponge, be sure not to scrub too hard. The sponge should be rinsed out almost completely before putting it on the walls.

It should contain 1 tablespoon vinegar, 1cup water, and 1 cup of alcohol. Mix one cup each of water, alcohol, and ammonia. Also mix water and vinegar at a ratio of 1:1.Spray the window's surface with the cleaner. If the Surface is dirtier, wipe the glass in an upward and downward motion with a soft cloth soaked with the cleaning solution. To remove the mixture, use the squeegee. From top to bottom, make one continuous motion. After every wipe, clean the squeegee blade. Wipe the squeegee with a lint-free towel. Wipe the window borders clear of any residual cleanser using a lint-free cloth. This activity is perfectly suited to newspaper.

To improve the aesthetics of modern living space, contemporary interior designer’s use of Furniture made of wood with sophisticated designs. In addition to being strong, wood may last a very long time with the proper maintenance. The wooden furniture may be kept looking Attractive with regular washing and the occasional deep clean.

We can observe cobwebs are growing up here & there in a Room from upper level or in everywhere. This looks very bad that a room is been covered with cobwebs. No any housekeeping staff can tolerate this event.

Cobweb brush is the solution for this. We need to use a extension pole with cobweb brush attached for a long heighted false ceiling.

When planning floor cleaning, take into account traffic pattern, peak hour, and weather Conditions. Take into account how long it will take the cleaned area to dry.

When cleaning, use the proper barricade to reroute pedestrians. Verify that there is adequate drainage in every area. Ensure that everything is clearly visible.

Without skipping any steps, thoroughly clean every space. Verify that all equipment is spotless and in good working condition. Check to ensure the right tools are being used for the floor space. Eliminate all trash. Hold a dry mop at a 45-degree angle and Press the mop forward; never lift the mop off the ground. For crowded spaces like an office or school, use a small dust mop. When mopping, begin at the entrance and work your way toward the middle of the space. If the furniture can be moved easily, move it and wipe the area where it is. Clean up rubbish with a broom and dustpan. After the floor has been cleaned, shake the dry mop head multiple times in a plastic bag or brush it out with a stiff-bristled brush. Handle the dry mop when cleaning is complete. When the mop head is dirty, replace it. Hang the dust mop with the yarn pointing away from the wall.

Frequently vacuum the floor Clean up the stain as soon as possible, avoid getting any dry cleaning solution on the rubber backing. Shampoo as required. To prevent rust spots, guard furniture and metal legs from damp carpet. When needed, use drugget to protect the carpet. Fix worn-out edges and damaged components. Trim any looped or loose ends; never pull the pile.

Before cleaning air conditioner, ensure that it is unplugged from the power source. Next, locate and remove the filter on your AC unit. Some window units feature filters that simply pull out; others might first require the removal of the front cover with a screwdriver.

After removing the filter, we can use a hand vacuum to extract as much dust and debris as possible. Next, we will grab a bucket with soapy water and a bristle brush and wash the filter in the water, gently brushing it as needed until clean. Air-dry the filter completely before re-installing it.

We only do dry dusting to any electrical items from outside after unplugged from the power source.

Remove the shelving and drawers. Clean each piece with hot soapy water, rinse, and dry them with a towel. Wipe down the inside of your fridge with hot soapy water working from the top down. Make sure you clean the roof of the fridge as well as drawers and shelf guides. Use a paste made with baking powder and water to get rid of stains. Wipe down everything inside your refrigerator with a clean, damp cloth.

Hydrogen peroxide is a safe and natural alternative to using for disinfecting, and it’s an effective antibacterial and mold killer. Pour a bottle of hydrogen peroxide into a spray bottle and spray down the inside. Let the peroxide do its job for about 10 minutes, then wipe it off with a damp cloth. Dry everything down and move on to exterior refrigerator cleaning.

Clean the top of the refrigerator to get rid of the greasy dust that has accumulated. Remove the water dispenser tray and wash it with hot, soapy water and vinegar to clean it and disinfect it. Clean the front and sides of your fridge with soapy water and use glass cleaner to remove smudges and fingerprints on stainless steel. Remove the bottom plate and wash it with hot, soapy water in the sink and dry it.

Always use a clean microfiber cloth to do this job. Microfiber helps remove germs without the harmful side effects of chemicals. For tough cleaning, we can use larger-looped microfiber.

Microfiber naturally disinfects surfaces without the negative side effects of chemicals. Rub down the entire surface of the switch with one of the eight sides of the cloth.

Switch off the switch board electricity. Do not run water over the cloth, or it will spread the dirt that you have picked up. Instead, use another side of the folded cloth to wipe down the next switch.

We could use vinegar for this purpose. After drying again the switch board will be on.